Glass Hydrogen Water Bottle Generator L100

The L100 body is crafted from premium High Borosilicate Glass. This material is chosen for its superior heat resistance, chemical stability, and purity—ensuring your water never tastes like plastic. It is 100% BPA-free.

The L100 features a compact 14oz (400ml) capacity. It is designed specifically for portability—perfect for carrying in a handbag, placing on an office desk, or taking on short commutes without the bulk of larger gym bottles.

We strongly recommend using mineral water, purified water, or filtered water. Since this model uses advanced electrolysis technology, using clean water ensures the best hydrogen production efficiency and prevents scale buildup on the plates.

⚠️ ABSOLUTELY NOT. Because the L100 is made of sealed glass, running continuous cycles creates excessive internal pressure, which may cause the glass to crack or burst.Rule: Run ONLY ONE cycle at a time. Always open the lid to release pressure before starting a new cycle.

Please ensure the water temperature is between 0°C and 60°C (32°F – 140°F).Do not use boiling water (>60°C): High heat can damage the sealing rings and increase internal pressure dangerously.Do not use freezing water (≤0°C): Freezing expansion may crack the glass body.

NO. The glass body and the base are integrated and cannot be detached.Warning: Do not attempt to unscrew or forcibly separate them, as this will break the device and cause leaks.

NO. Since the glass is fixed to the electronic base (which contains the battery), the entire unit cannot be placed in a dishwasher or submerged in water.

Mineral buildup (scale) is normal. To descale:Pour a small amount of white vinegar or citric acid into the bottle.Fill with warm water and let it soak for 30–60 minutes.Pour out the solution and rinse thoroughly with clean water until the smell is gone.

Since the glass body is integrated with the base, do not submerge the bottle.Fill the bottle with warm water (under 60°C/140°F).Screw on the lid and shake gently to rinse the interior.Pour out the water and repeat if necessary.Wipe the exterior and the base with a soft, damp cloth.

Since the device is shipped with a dry electrode module, it requires a simple initialization step to ensure optimal conductivity and hydrogen production.Soak: Fill the cup with pure water, screw the lid on tightly, and let it soak for 20 minutes to fully prime the plates.Start: After soaking, connect the power cable and run a 10-minute electrolysis cycle once.Ready: Your bottle is now activated and ready for daily use.

If the bottle hasn't been used for a while, the membrane electrode may have dried out. Please follow our "3-Day Reactivation Protocol" to restore performance:Soak: Fill with water and soak for 20 minutes.Daily Routine (3 Cycles): Perform three 10-minute cycles per day.Cycle 1 & 2: Open the lid after each cycle to release pressure.Cycle 3 (Final): Do NOT open the lid. Keep the bottle closed and pressurized overnight until the next day.Repeat: Do this for 3 consecutive days. This will fully rehydrate the membrane and restore bubble production to optimal levels.Maintenance Tip: You can also perform this routine periodically (e.g., once a month) as regular maintenance to ensure the plates stay in peak condition.

The L100 is designed to lock in hydrogen for up to 6 hours, provided the lid is not opened after the cycle finishes.However, hydrogen is a very light gas and escapes quickly once the bottle is opened. Therefore, we recommend consuming the water within 1 hour after opening the lid to enjoy the maximum benefit.