Glass Hydrogen Water Bottle Generator X100

The X100 is our "Sport Giant" model, featuring a massive 34oz (1 Liter) capacity.It is specifically designed for athletes, gym-goers, and high-hydration users. One cycle provides enough hydrogen water to last through an intense workout session without needing constant refills.

Despite its large size and sporty look, the X100 body is made of premium High Borosilicate Glass.This ensures your water remains pure, plastic-free, and safe. However, because it holds 1L of water and is made of glass, it is heavier than plastic bottles.

The "10." indicates the exclusive 10-Minute Deep Electrolysis Mode.Why 10 minutes? Because the X100 holds a large volume of water (1 Liter), it requires a longer cycle to fully saturate the water with hydrogen bubbles compared to smaller bottles. Simply press the power button to start this optimized cycle.

⚠️ NO. Similar to our other glass models, the X100 is a sealed container. Electrolysis creates internal pressure. Running consecutive cycles without opening the lid causes excessive pressure buildup. To protect the device and ensure safety, always open the lid to release pressure before starting a new cycle.

Since the X100 is shipped with a dry electrode module, it requires a simple initialization step to ensure optimal conductivity and hydrogen production.Soak: Fill the bottle with pure water, screw the lid on tightly, and let the electrode module soak for 20 minutes.Start: After soaking, connect the USB-C cable and run the 10-minute electrolysis cycle once.Ready: Your X100 is now activated and ready for daily use.

If the bottle hasn't been used for a while, the electrolytic plates may need reactivation to restore their activity. Please follow our "3-Day Reactivation Protocol":Soak: Fill with water and soak for 20 minutes.Daily Routine (3 Cycles): Perform three 10-minute cycles per day.Cycle 1 & 2: Open the lid immediately after each cycle to release pressure.Cycle 3 (Final): Do NOT open the lid. Keep the bottle closed and pressurized overnight until the next day.Repeat: Do this for 3 consecutive days. This will fully restore the generator's performance and bubble production.💡 Maintenance Tip: You can also perform this routine periodically (e.g., once a month) to keep the plates in peak condition.

YES. The glass body is detachable.Detachable Design: Unlike integrated models, this unit features a threaded design that allows you to unscrew the glass body from the electronic base. This structure is designed specifically to make cleaning the interior easier and more thorough.How to Clean: Simply unscrew the glass body from the base to wash it with warm water. Note: While the glass is washable, do not submerge the electronic base in water. Please wipe the exterior of the base with a damp cloth only. When reassembling, ensure the body is screwed on tightly to prevent leaks.

We strongly recommend using mineral water, purified water, or filtered water. Since this model uses advanced electrolysis technology, using clean water ensures the best hydrogen production efficiency and prevents scale buildup on the plates.

Please ensure the water temperature is between 0°C and 60°C (32°F – 140°F).Do not use boiling water (>60°C): High heat can damage the sealing rings and increase internal pressure dangerously.Do not use freezing water (≤0°C): Freezing expansion may crack the glass body.

That is the Drainage Storage Drawer.Function: It is designed to collect any excess water or condensation that may be discharged from the electrolyzer during the hydrogen generation process.Maintenance: Please check this drawer periodically. If you see it is full of water, simply pull it out, pour away the water, and reinsert it into the base.

If the lid remains tightly sealed and unopened, the X100 can maintain hydrogen concentration for up to 6 hours.However, hydrogen is a very light gas and escapes quickly once the bottle is opened. Therefore, we recommend consuming the water within 1 hour after opening the lid to enjoy the maximum benefit.